2
INSTALLATION
PRIOR TO CONNECTING
Ensur e that the app liance is not d amaged. Che ck
that the oven door closes firmly against the
door support and that the internal door seal is
not damaged. Empty the oven and clean the
interior with a soft, damp cloth.
AFTER CONNECTING
The earthing of this appliance is c o m p ul s o r y . T h e
manufacturer will accept no responsibility for
injury to persons, animals or damage to ob-
jects arising from the non-observance of this
requirement.
The manufacturers are not liable for any
problems caused by the user’s failure to ob-
serve these instructions.
Do not operate this appliance if it has a damaged
mains cord or plug, if it is not working proper-
ly, or if it has been damaged or dropped. Do
not immerse the mains cord or plug in water.
Keep the cord away from hot surfaces. Electri-
cal shock, fire or other hazards may result.
Do not remove the microwave inlet protection
plates located on the side of
the oven cavity wall. They
prevent grease & food par-
ticles from entering the mi-
crowave inlet channels.
Ensure the oven cavity is
empty before mounting.
Check that the voltage on the rating plate corre-
sponds to the voltage in your home.
The oven can be operated only i f t h e o v e n d o o r i s
firmly closed.
MOUNTING THE APPLIANCE
Follow the supplied separate mounting in-
structions when installing the appliance.
Do not use extension cord:
If the power supply cord is too short, have
a qualified electrician or serviceman in-
stall an outlet near the appliance.
To Next Page
Loading...
