9
1
2
5
A
E
B
C
D
EN - Remote Control Connection
EN: Open the cover
EN: Close the cover
10 sec.
3
A
I
L
1_Move 1 or more PINs in order to create a new code,
which shall be different from the default one.
2_ Once this operation is completed, by simultaneously pressing
the remote control A KEY ( Light) and the hood E KEY / Light)
for 10 seconds, the remote control and hood connection procedure
is performed with the new code.
3_At the end of this operation , please check the remote
control- hood connection proper operation.
IT:
DEFAULT CODE
The remote control supplied with the appliance is provided with a connection to
the hood via a default code ; in case of improper operation, disconnection or
interference with other appliances/devices, please change the code as follows:
To Next Page