USER INSTRUCTIONS
been selected, release all buttons. There is a 5-second
acceptance delay during which no button should be touched.
The ‘pot’ symbol will be illuminated indicating Manual
cooking mode is available. To the oven to manual mode
at any chosen time, simply press and release the ‘manual’
button (4). This will cancel any previously entered programs.
2)
COOKING DURATION MODE:
Set the oven to the required temperature and briefly press the
‘duration’ button (2). Set the required cooking duration time
using the + or – buttons. The ‘pot’ symbol will remain
illuminated and ‘AUTO’ will appear in the display. The timer
will revert to time mode after 5 seconds. At the end of the
selected duration time, the oven will switch OFF and an
audible signal will be emitted, ‘AUTO’ will flash and the ‘pot’
symbol will be extinguished. To cancel the alarm mode audible
signal, briefly press the ‘manual’ button (4). As the oven is
now set for manual operation, ensure the oven controls are in
the OFF position.
3)
COOK END MODE:
For the cooking end mode, set the oven to the desired
temperature and briefly press the ‘end time’ button (3).
Set the required cooking end time using the + or – buttons.
‘AUTO’ will appear in the display. The time will revert to time
mode after 5 seconds. When the time of day equals the cooking
end time, the oven will switch OFF and an audible signal will
be emitted. Cancelling the alarm is as above, ensure the oven
controls are in the OFF position.
4)
FULLY AUTOMATIC COOKING MODE: Set the oven to
the desired temperature and briefly press ‘duration’ button
(2).Set the required cooking duration time with the + or -
buttons and ‘AUTO’ will appear in the display.
12
turn
To Next Page
Loading...
