14
Selecting a cooking function and temperature
After your appliance is connected to your mains supply for the first
ime, the numbers ot n the timer display will flash. Before you select a
ou should set the time of day (see previous section
.
you should select the
o y should then be cleaned with
he oven should be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
cooking function y
or how to do this)f
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process,
conventional oven or grill function and turn the thermostat dial
to its maximum temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave each oven on maximum setting for 30 – 40
minutes.
o IMPORTANT: You should not burn off both ovens
simultaneously.
After both cavities have cooled, the
warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used.
Outer parts of to
To Next Page
Loading...
