Using your Baumatic fridge
Before switching on
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
installation instructions.
o After delivery, wait for a minimum of eight hours before
connecting the appliance to your mains supply. This will allow
any refrigerant gasses that may have been disturbed during the
transportation process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.
During first use
o With dry hands, connect your appliance to your mains supply.
Set the thermostat control knob to position <7> for 24 hours
before positioning it to the normal setting of <3>.
o When you first switch on the appliance, the compressor will run
more frequently for approximately 24 - 48 hours.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
reconnecting it to your mains supply.
10
To Next Page
Loading...
