28
Should the seal not adhere to the casings of the appliance correctly,
it will have to be heated from a suitable distance using a hair dryer
and lightly stretched in order to attain the required dimensions.
NOTE FOR AFTER REVERSING THE DOOR
¾ After you have reversed the door, check that the
magnetic gasket seals correctly. It must NOT be
creased or crushed so that there is a gap between it
and the inside of the door. It must also seal all
around the door.
¾ In case the seal does not fit perfectly, pull it out and
rotate it by 180 degrees.
¾ Should the seal not adhere to the casings of the
appliance correctly, it will have to be heated from a
suitable distance using a hair dryer and lightly
stretched in order to attain the required dimensions.
To Next Page
Loading...
