3
Congratulations on purchasing a Baumatic Cooker
Hood!
To fully enjoy using your appliance long into the future,
please firstly familiarise yourself with its specifications,
safety advice and operational instructions included in this
manual. You will also need this manual to ensure that your
Cooker Hood has been installed properly.
DIMENSIONS
Width: 600 mm
Depth: 500 mm
Height: 170 mm
Your stainless steel Cooker Hood is fitted with:
• Pushbutton control operation
• 2 Metallic grease filters
• 3 speeds
• 1 light
Extraction capacity – 290 m
³/hr
Optional Extra: 1 x UCF1 Carbon filter for air
recirculation.
NOTE:
PLEASE NOTE THAT YOUR BAUMATIC COOKER HOOD CAN BE USED
EITHER IN RECIRCULATION MODE OR IN EXTRACTION MODE. TO USE THE HOOD
IN RE-CIRCULATION MODE, YOU WILL NEED TO FIT THE CARBON FILTER.
IF YOU WANT TO USE YOUR COOKER HOOD IN EXTRACTOR MODE, YOU WILL
NEED TO FIT DUCTING (DIAMETER OF 125MM) TO THE SPIGOT (SEE
INSTALLATION DIAGRAM) AND WORK IT THROUGH A HOLE OF 130MM SO THAT IT
IS EXPELLING FUMES THROUGH A DEDICATED FLUE SYSTEM THAT ISN’T
COMBINED WITH OTHER EXHAUSTS.
Specifications of your BT13.1SS Cooker Hood
To Next Page
Loading...
