13
ave Using your microw
The adjustment dial
o The adjustment dial (E) should only be turned clockwise
ttings, the adjustment dial (E)
ed anti-clockwise (towards the clock symbol).
connected to the power supply for the
the hour time. You can
the clock button (G) to confirm the minute time. The “:”
(C) is
microwave will return to the previous step.
that may have been left
g either a sponge or soft cloth. No
rs should be used. The appliance should be
afterwards.
(towards the book symbol) if you want to use the auto menu
function.
o For all other purposes and se
should be turn
Setting the clock
o When your appliance is
first time, the LED display (A) will show 0.00 and an audible
signal will sound once.
o Press the clock/kitchen timer button (G) to choose a 12 hour or
a 24 hour clock.
o Use the adjustment dial (G) to adjust
adjust the hour time between 1 – 12 in 12 hour clock mode and
between 0 – 23 in 24 hour clock mode.
o Press the clock button (G) to confirm the hour time. The minute
digits will flash.
o Turn the adjustment dial (E) to adjust the minute time.
o Press
symbol will flash and the time of day will light on the LED display
(A).
o If during the clock setting process the stop/clear button
pressed, the
Before first use
o To remove any residue from the oven
from the manufacturing process, you should place a cup that is
half filled with water in the microwave.
o Set the microwave on its highest power level for 2 minutes.
o The oven cavity and outside of the appliance should be cleaned
with warm soapy water, usin
abrasive cleane
thoroughly dried
Downloaded From Microwave-Manual.com Manuals
To Next Page
Loading...
