What to do if my Baumatic BWM7001 Washer machine is completely unresponsive?
If your Baumatic Washer is completely unresponsive, it might be due to several reasons: * A loose connection in the power socket. Ensure the connection is tightened. * A broken fuse. Call an electrician to check the socket or fuse. * A power cut. * Voltage is too high or low.
What to do if my Baumatic BWM7001 Washer control panel is not responding during a program?
If the control panel of your Baumatic Washer isn't responding during a program, try pausing the machine before changing the cycle. Also, ensure that the safety lock is not activated.
Why does my Baumatic Washer delay the spin cycle?
Your Baumatic Washer may delay the spin cycle for 15 to 60 seconds after the drain cycle or when you select the spin cycle only. This is normal.
Why does my Baumatic BWM7001 wash process change from SPIN to RINSE?
If the clothes are not evenly distributed inside the tub of your Baumatic Washer, the washing machine will input water to balance them.
Why Baumatic Washer does not add water when it starts from the RINSE function?
When starting from the RINSE function, your Baumatic Washer begins with the SPIN process to remove water and detergent from the clothes. If water is already in the tub, it will drain it first before adding more water.
Why is there water flowing out of my new Baumatic BWM7001 drainage pipe?
If you notice water flowing from the drainage pipe when using your Baumatic Washer for the first time, it's just remaining water from the factory checking process.
Essential precautions for repairs, cable damage, appliance handling, and operation.
Mandatory compliance with regulations and avoiding hazardous installation locations.
Guidelines for proper appliance usage, detergent, and handling during operation.
Measures to prevent children from accessing or operating the washing machine.
Details of washing programs, load capacity, spin speeds, and control features.
Physical dimensions for both BWM7001 and BWM5001 models, and energy rating.
Diagram and numbering of all buttons and indicators on the control panel.
Detailed explanation of how to use each button on the control panel.
Instructions for adding powder and liquid detergent to the drawer or drum.
Guidelines for using bleaching agents, including dilution and washing advice.
Instructions on how to manually add softener during the wash cycle.
Factors influencing detergent usage: soiling, load size, and water hardness.
Steps for sorting laundry by fabric type, soiling, and checking pockets for items.
Guidance on using detergent, including dilution and placement in the drawer or drum.
Table of laundry item weights to help determine appropriate wash load sizes.
Steps to start a wash program and how to pause or resume it.
Guide to selecting the most suitable wash program based on laundry type.
Explanation of how to use the process button to modify wash cycle features.
How to adjust the duration of the wash phase using the wash button.
How to adjust the number of rinse cycles using the rinse button.
Daily checks and practices after each wash cycle for appliance care.
Instructions for cleaning the exterior and control panel safely.
Steps for removing and cleaning the detergent drawer and its recess.
Choosing a suitable location, ensuring stability, and maintaining clearances.
Troubleshooting water not draining or excessive spin noise using error codes E1 and E3.
Troubleshooting low water, sensor issues, or constant water flow using error codes E4, E6, E7.
Steps for persistent fault codes and advice on contacting customer care.
Solutions for problems like no water during rinse, spin to rinse change, unresponsive panel.
Explanation for spin delays and initial water flow during first use.
Troubleshooting steps for a completely unresponsive machine, checking power and fuses.
To Next Page
General
