20
0)
ust ensure that it is perpendicular to the hood.
chimney section D
on the wall with a pencil and then remove chimney section D.
1) Take
arks that you made in step 9
tact with the wall, use a pencil to
mark on the wall the anchoring holes that are cut out of the
bracket
1 Lift chimney section D upwards until it reaches the ceiling. You
m
o Mark the side measurement of both sides of
1 the fixing bracket (E) and place it between the two pencil
m
o Keeping the bracket in con
Get user manuals: See SafeManuals.com
To Next Page
Loading...
