18
o Press the minus button again and the audible signal will adjust to
the next level.
o When the required level of audible signal is reached, release the
minus button and it will be set.
Selecting a cooking function and temperature
Selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
you can select a cooking function or set a temperature, you
must set the appliance into “manual operation” mode.
o To select manual operation mode, press the “manual operation”
button (9) on the control panel.
Selecting an oven function
P610SS P620BL/SS P630SS
The oven function selector knob should be used to select the particular
mode of cooking that you require. The appliance will utilise different
elements within the oven cavity, depending on the oven function that
you select. When a function is selected, the power indicator light will
come on.*
* On the P630SS, the control knobs push in and pop out. Before
turning either knob, you should push it in to pop the control knob out.
To Next Page
Loading...
