Baumatic PV972GL - Installing the Glass Canopy

Installing the glass canopy (PV972GL only)
o Carefully turn the appliance upside
down, so that the grease filter is
pointing upwards to the ceiling.
o Remove the fixing screw that holds the
grease filter in place and then pull away
the grease filter from the cooker hood.
o Use a screwdriver to remove the 6
fixing screws that hold the base of the
cooker hood in position.
o You should also remove the screws in
the light wiring point that is situated
inside of the hood.
22
o Remove the base of the cooker hood by pulling it upwards and
away from the main body of the hood.
o Open the cover of the light wiring point that is situated inside of
the hood and then pull apart the wires that are inside.