TAM 00624 4
DS 100 – 200 03 / 2005
Three-phase synchronous motor, air-cooled English
1 General Safety Instructions
1.1 Safety
This electric motor has been constructed in accordance with the relevant safety standards and
underwent an operational safety check before leaving our factory.
To ensure correct commissioning and safe utilisation, please read the following:
• these Commissioning and Maintenance Instructions
• the safety and commissioning notes
• the technical documentation that accompanies the product
• the commissioning and safety notes provided by the manufacturer of the converter
• the national, local and system-specific regulations concerning your finished product.
We draw your attention to the following hazards when using the product:
Hazards resulting from • lifting and transport processes
• electrical current
• moving parts
• hot surfaces
• EMC disturbances
• mechanical overloads
• thermal overload
To avoid damages to persons and property and minimize residual risks, please read all of the
safety instructions and, in particular, those that are marked with a symbol.
Danger to life through electrical shock
Non-observance can lead to death obrahanr grave injury.
Warning concerning general dangers
Non-observance can lead to serious injury or damage to assets.
Warning concerning dangerous situation
Non-observance can lead to damage of system or peripheral equipment.
Do not touch!
Non-observance can lead to serious injury.
Unpermitted action
Non-observance can lead to serious injury.
Warning concerning hot surface
Non-observance can lead to serious injury.
Electrostatically sensitive components
Non-observance can cause damage to the plant or the environment.
To Next Page
Loading...
Need help?
General
