Edition: 11/2007
Technical Instructions
Commissioning and Maintenance Guide
TAM 00 526
Page 17 / 18
Sectional Drawing:
6 Decommissioning, Removal, and Disposal
At decommissioning of the motors, the following also applies:
− Disconnect the motor from the mains (refer to 1.6)
− If necessary carry out discharging (e.g. the condensor)
Take the steps below to dismount the motor:
− disconnect the electrical connection
− release the motor attachment screws
The motor contains materials like steel, copper and insulation material.
You must disassemble the unit appropriately and dispose of the material separately
To Next Page
Loading...
