4. Engine start procedure.
• Make sure engine is in neutral.
• Press the glow button for 5 seconds.
• Press the ignition switch down, an alarm will sound.
• Press the start button until the engine is running.
• When the engine is running check you have water coming out of the
exhaust.
• To stop the engine push the ignition switch upwards for 2 clicks and hold
until the engine has stopped.
Glow switch
Ignition switch
Start button
Should you hear an engine alarm during operation, check which light
is on and immediately shut down the engine-CALL HORIZON
All our yacht engines run with diesel fuel. There is a diesel filler cap
on the transom which is clearly marked “DIESEL” DO NOT PUT
WATER IN HERE.
To Next Page
Loading...
