Baxi Avanta Plus 30s User Manual

Baxi Avanta Plus
18s - 24s - 30s
24c - 28c - 35c - 39c
User’s Operation Instructions &
High-efficiency wall-hung boilers
Important Warranty Information
United Kingdom
en
Please keep these instructions in a safe place.
If you move house, please hand over to the next occupier.

Baxi Avanta Plus 30s Specifications

General

Brand	Baxi
Model	Avanta Plus 30s
Category	Boiler
Language	English

Summary

Safety Precautions

General Safety Warnings

General safety pictograms and important precautions for user safety.

Safety During Operation

Crucial safety advice for operating the boiler and associated systems.

Boiler Problem Diagnosis

User-Resolvable Error Codes

Troubleshooting common error codes that users can resolve.

Installer-Resolved Error Codes

Error codes requiring professional intervention by an installer.

Boiler Settings Adjustment

Central Heating Flow Temperature (P1)

How to adjust the flow temperature for central heating.

Domestic Hot Water Temperature (P2)

How to adjust the temperature for domestic hot water.

Boiler Regulation Modes (P3)

Configuring boiler operation for CH and DHW modes.

Eco and Comfort Mode Settings (P4)

Switching between Eco and Comfort operating modes.

Display On/Off Settings (P6)

Adjusting the boiler's display to be always on or automatically off.

Boiler Disabling and Enabling

Disabling Boiler with Frost Protection

Procedure to disable the boiler while retaining frost protection.

Disabling Boiler Without Frost Protection

Steps to completely disable the boiler without frost protection.

Enabling the Boiler

Steps to properly enable the boiler after a shutdown.

Warranty and Service Information

Warranty Activation and Service Requirements

How to activate the warranty and schedule annual servicing.

Customer Support and Problem Resolution

Baxi's service commitment and how to report faults.

Warranty Coverage Details

What is covered and what is excluded by the boiler warranty.

Benchmark Scheme and Compliance

Information on the Benchmark Scheme for proper installation and servicing.