Need help?Do you have a question about the Baxi LSGNW 25 and is the answer not in the manual?
General| Heating Capacity | 2.8 kW |
|---|---|
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8 kg |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor Unit) | 50 dB |
Essential safety guidelines for installers, covering electrical, plumbing, and general installation practices to prevent hazards.
Critical safety information and precautions when working with R32 refrigerant, including ventilation and equipment requirements.
Specifies the necessary tools and equipment certified for use with R32 refrigerant to ensure safe and effective installation.
Outlines the required standards for copper pipes used with R32 refrigerant, focusing on material thickness and type.
Specifies the minimum room area criteria for R32 air conditioner installations to maintain safety and prevent refrigerant concentration issues.
Lists all components and accessories provided with the indoor unit of the air conditioner.
Lists all components and accessories provided with the outdoor unit of the air conditioner.
Comprehensive technical data for different models, including power ratings, dimensions, and electrical characteristics.
Defines the acceptable minimum and maximum ambient temperatures for cooling and heating operations.
Recommendations for selecting optimal locations for indoor and outdoor units, considering air circulation and environmental factors.
Specifies the required spatial clearances around the indoor unit for proper installation and air intake.
Instructions for positioning the outdoor unit, ensuring adequate clearance, protection, and stability against environmental factors.
Details maximum permissible lengths and height differences for refrigerant lines, with guidance on additional refrigerant charges.
Procedures for mounting the indoor unit bracket and the unit itself, ensuring secure and level installation.
Instructions for drilling entry points and connecting refrigerant pipes, drainage, and electrical cables between units.
Guidance on alternative installation methods using side connections and preventing condensation on wrapped conduits.
Steps for correctly connecting and routing the indoor unit's drainage pipe to ensure efficient water removal by gravity.
Procedures to verify the functionality of the water drainage system after installation.
Guidelines for securely fastening the outdoor unit to prevent movement, considering wind and site conditions.
Instructions for bundling and securing refrigerant pipes, drainage pipes, and electrical cables for routing and protection.
Detailed steps and torque specifications for connecting the refrigerant pipes between the indoor and outdoor units.
Method for detecting refrigerant leaks using nitrogen pressurization and leak detection devices.
Procedure for removing moisture and air from the refrigerant circuit using a vacuum pump.
Steps for correctly charging the system with refrigerant, considering pipe length and using an electronic scale.
Instructions for connecting the electrical cables to the indoor unit's terminal block.
Steps to follow for the initial startup and testing of the air conditioner in cooling mode.
A comprehensive checklist to verify the correct operation and performance of the installed air conditioner.
To Next Page
