EasyManua.ls Logo

Baxi JSGNW 25 User Manual

Baxi JSGNW 25
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
en
BAXI ASTRA: DC inverter air conditioner with heat pump mode.
lnstallation and Support Manual
JSGNW 25/35/50/70
LSGT 25-S/35-S/50-S/70-S
Question and Answer IconNeed help?

Do you have a question about the Baxi JSGNW 25 and is the answer not in the manual?

Baxi JSGNW 25 Specifications

General IconGeneral
BrandBaxi
ModelJSGNW 25
CategoryAir Conditioner
LanguageEnglish

Summary

SAFETY PRECAUTIONS

WARNINGS FOR INSTALLERS

Safety guidelines for installers regarding electrical connections, piping, and earthing.

SPECIFIC WARNINGS FOR R32 GAS USE

Precautions and requirements for using R32 refrigerant gas, including equipment and pipe specifications.

WEEE WARNINGS

Guidelines for the proper disposal of electronic equipment and its environmental impact.

ACCESSORIES INCLUDED

INDOOR UNIT

Lists the accessories included with the indoor unit, such as the user manual and remote controller.

OUTDOOR UNIT

Lists the accessories included with the outdoor unit, such as drainage connectors and brass nuts.

TECHNICAL DATA

INSTALLATION

CHOOSING THE INSTALLATION POSITION

Guidance on selecting optimal locations for indoor and outdoor units, considering air circulation and obstacles.

LENGTH OF REFRIGERANT CONNECTIONS

Details on maximum lengths, height differences, and additional charge for refrigerant pipes.

INSTALLING THE INDOOR UNIT

Step-by-step instructions for mounting the indoor unit and making pipe/cable connections.

DRAINAGE PIPE

Instructions for connecting the drainage pipe, ensuring proper slope for water removal.

INSTALLING THE OUTDOOR UNIT

Guidelines for securely installing the outdoor unit, considering wind, environment, and support structure.

CONNECTING THE PIPING

Procedures for routing, securing, and wrapping pipes and cables for connection between units.

REFRIGERANT GAS PIPING

CONNECTING THE PIPING

Detailed method for connecting refrigerant pipes to indoor and outdoor units, including torque specifications.

LEAK TEST

Procedure for testing the refrigerant system for leaks using nitrogen pressurization.

CREATING THE VACUUM

Steps to create a vacuum in the system to remove moisture, essential for compressor protection.

REFRIGERANT GAS CHARGE

WIRING

WIRING THE INDOOR UNIT

Guide for connecting cables to the indoor unit's terminals.

WIRING THE OUTDOOR UNIT

Instructions for connecting earthing wires and cables to the outdoor unit's terminal block.

OPERATING TEST

TEST PROCEDURES

Steps to follow before and during the initial operation test of the air conditioner.

EVALUATING PERFORMANCE

Checklist for assessing the air conditioner's performance, including fan rotation, noise, temperature, and pressure checks.

ERROR CODES

Related product manuals