To Next PageTo Next Page
Need help?Do you have a question about the Baxi luna duo-tec MP+ 1.35 and is the answer not in the manual?
General| Mounting | Wall-mounted |
|---|---|
| Output | 35 kW |
| Energy Efficiency Class | A |
| Fuel Type | Natural Gas / LPG |
| Heat Exchanger | Stainless Steel |
| Max Central Heating Temperature | 80 °C |
| Max Domestic Hot Water Temperature | 60 °C |
| Modulation range | 1:7 |
| Efficiency | Up to 94% |
| Domestic Hot Water Flow Rate at 35°C Rise | 14.5 l/min |
| Type | Combi |
| Central Heating Flow Temperature Range | 30°C to 80°C |
Explains various symbols used in the manual, including danger, warning, and important information indicators.
Provides advice on optimizing boiler efficiency and reducing energy consumption for heating and hot water.
Instructions for setting the heating and domestic hot water flow temperatures via the control panel.
Guides users on selecting between DHW, DHW & Heating, and Heating Only operational modes.
Details on the boiler pump's operation, modulation, and performance characteristics.
Guidance on installing concentric flue and air ducts, including length limitations and bends.
Instructions for installing separate flue and air ducts using a splitting kit.
Information on installing boilers in a cascade arrangement using shared flue collectors.
Procedure for connecting a room thermostat to the boiler's terminal block.
Details on connecting optional accessories like the Remote Control unit.
Configuration steps to enable the room sensor for climate control with the remote panel.
Procedure to adjust flow temperature modulation by disabling a specific parameter.
Function to eliminate air from the heating circuit after installation or maintenance.
Procedure to calibrate the gas valve for optimal performance.
Instructions for safely removing and cleaning the boiler's condensate trap.
Detailed steps for cleaning the heat exchanger, including chemical use and safety measures.
Procedure for inspecting the burner for damage, checking electrodes, and ensuring proper seating.
Guidance on measuring and checking combustion efficiency and emissions.
Detailed technical parameters and performance data for the boiler models.
Summary of key product features and performance data in a standardized format.
