To Next PageTo Next Page
Need help?Do you have a question about the Baxi luna platinum+ and is the answer not in the manual?
General| Model | Luna Platinum+ |
|---|---|
| Category | Boiler |
| Fuel Type | Natural Gas |
| Modulation Ratio | 1:7 |
| Installation Type | Wall-mounted |
| Boiler type | Combi |
| ERP efficiency | A |
| Efficiency | 93% |
| Central Heating Output | 24 kW |
| Heating Output | 24 kW, 33 kW, 40 kW |
Safety precautions and warnings for gas, fumes, flammables, and servicing.
Explanation of symbols and indicators on the boiler's control panel.
Procedure for initial configuration upon first boiler ignition.
Accessing and displaying boiler information and fault codes.
Procedure for setting the boiler's internal clock and date.
Steps to select the desired language for the boiler's control interface.
Instructions for adjusting central heating and domestic hot water temperatures.
Overview of functions accessible via the 'Easy Menu' button for quick access.
Explanation of the various operational modes for the boiler.
Details on the four heating modes: On, Reduced, Timed, and Off.
How to set the lower temperature for reduced heating mode.
Setting up a program for periods of absence to maintain a base temperature.
Programming options for weekly intervals based on day groups.
Customizing daily heating and DHW schedules for individual days.
Modifying existing hourly heating and DHW time bands.
How to cancel programmed weekly settings and revert to factory defaults.
Procedures to lock and unlock the control panel functions to prevent unauthorized access.
Instructions on how to properly turn off the boiler.
Information on fault codes, symbols, and their meanings displayed by the boiler.
Methods for clearing boiler faults (automatic, manual, or service).
Guidance on when and how to contact technical support, noting fault codes.
A comprehensive list of fault codes, their descriptions, and potential causes.
Procedure for filling the heating system with water and checking system pressure.
Information on converting the boiler between different gas types.
Measures for extended periods of non-use and frost protection features.
Recommendations for regular boiler checks to ensure efficiency and safety.
Essential guidelines for installers before beginning the boiler installation process.
Step-by-step instructions for physically mounting and connecting the boiler.
List of all components included in the boiler packaging.
Guidelines for installing flue and air intake ducts, including types and lengths.
Installation details for coaxial flue and air duct systems.
Installation procedures for separate flue and air duct configurations.
Instructions for wiring the boiler, including terminal block layouts and safety.
Details for connecting to terminal block M1, focusing on live/neutral polarity.
Wiring information for terminal block M2, including sensor and control panel connections.
Wiring specifications for terminal block M3, including relay contacts.
Step-by-step guide for wiring a room thermostat to the boiler.
Instructions for mounting and connecting the wall-mounted control panel.
Guide to accessing and configuring various boiler parameters.
Configuration steps to enable and set up the room sensor for temperature control.
Setting up modulation for flow temperature based on external conditions.
Adjusting minimum temperature setpoints for high-temperature heating systems.
Adjusting maximum temperature setpoints for low-temperature heating systems.
Instructions for integrating the boiler with a multi-zone heating system.
Wiring connections for zone valves/pumps and thermostats.
Setting boiler parameters to manage zone heating and DHW functions.
Guide for connecting the boiler to a solar thermal system.
Setting boiler parameters for solar plant pump and sensor configurations.
Configuration parameters for systems using vacuum solar collectors.
Information on optional accessories available for purchase.
Connecting and setting up an external temperature sensor.
Adjusting the heating curve to match different system types.
Instructions for connecting an external storage boiler to the heating unit.
Diagram illustrating connections for an external storage boiler.
Step-by-step guide to activate the anti-legionellosis function.
Step-by-step guide for enabling special functions like chimney sweep and deaeration.
Function to remove air from the heating circuit after installation or maintenance.
Information regarding the boiler's gas valve and its auto-adaptation feature.
Procedures for converting the boiler to operate with different gas types.
Details on parameters affecting combustion efficiency and safety.
Guide for performing combustion analysis to ensure optimal performance.
Explanation of the various safety devices and their functions within the boiler.
Information on the pump's performance characteristics and modulation range.
Recommended annual maintenance checks for optimal boiler efficiency and longevity.
Description of the hydraulic unit components and their functions.
Steps for cleaning the cold water filter located on the hydraulic assembly.
Correct placement of electrodes for ignition and flame sensing.
