EasyManua.ls Logo

Baxi LUNA HT 1.240 User Manual

Baxi LUNA HT 1.240
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Wall-mounted condensing boilers
Installer’s and User’s Instructions
UNI EN ISO 9001
CERTIFICAZIONE DEI SISTEMI
QUALITA' DELLE AZIENDE
HT
BAXI S.p.A., one of the leading European enterprises to produce central heating and hot water devices for domestic use (wall-mounted gas-operated
boilers, floor-standing boilers and electrical water-heaters) has obtained the CSQ certificate of conformity to the UNI EN ISO 9001 norms. This
certificate guarantees that the Quality System applied at the BAXI S.p.A. factory in Bassano del Grappa, where your boiler was produced, meets
the standards of the UNI EN ISO 9001 norm, which is the strictest and concerns all organization stages and operating personnel involved in the
production and distribution processes.
0085
Question and Answer IconNeed help?

Do you have a question about the Baxi LUNA HT 1.240 and is the answer not in the manual?

Baxi LUNA HT 1.240 Specifications

General IconGeneral
MountingWall-mounted
Fuel TypeNatural gas / LPG
Max Heat Output24 kW
Max working pressure3 bar
IgnitionElectronic
Heat exchangerStainless steel
TypeCondensing

Summary

Instructions for the User

Instructions Prior to Installation

Guidance on preparing the system for boiler installation, covering hot and heating water circuits.

Instructions Prior to Commissioning

Essential checks and operations before the initial startup of the boiler.

Commissioning and Control Panel

Commissioning the Boiler

Detailed steps for lighting the burner and adjusting the boiler control panel.

Control Panel Overview

Explanation of the boiler's control panel buttons and display icons for operation.

System Standstill, Gas Change, and Servicing

Prolonged Standstill and Frost Protection

Recommendations for system shutdown in winter and the boiler's frost protection feature.

Gas Change Procedures

Information on converting the boiler to LPG, requiring a qualified engineer.

Annual Servicing Instructions

Guidelines for regular maintenance to ensure efficient and safe boiler operation.

Instructions for the Installer

General Information for Installers

Remarks and guidelines for service engineers on installation and maintenance standards.

Pre-Installation Checks for Installers

Essential checks and system preparation before boiler installation for installers.

Boiler Installation and Components

Boiler Installation Procedure

Steps and considerations for physically mounting the boiler and making connections.

Boiler Dimensions and Fittings

Details on boiler physical size and a list of included installation fittings.

Flue and Air Duct Installation

Installation of Flue and Air Ducts

Instructions and warnings for installing exhaust and air intake ducting systems.

Flue Duct Installation Options

Diagrams and specifications for various flue duct configurations (coaxial, horizontal, vertical).

Mains Supply and Electrical Connections

Connecting the Mains Supply

Electrical safety, grounding, and connection of the boiler to the power supply.

Electrical Connection Details

Details on terminal boards M1/M2 and connections for accessories like thermostats.

Connecting Optional Accessories

Outdoor Temperature Sensor Connection

How to connect the optional outdoor sensor and set heating curve parameters.

Connecting a Zoned System

Instructions for connecting systems with multiple heating zones using accessories.

Remote Water Heater Connection

Gas System and Parameter Settings

Gas Change Modalities

Procedures for converting the boiler to operate with different gas types.

Gas Valve Calibration

Using the control panel to set fan speed and calibrate gas valve for optimal performance.

Setting Boiler Parameters

Boiler Operation and Safety Devices

Control and Operation Devices

Overview of safety devices and operational controls like thermostats and sensors.

Ignition and Combustion Checks

Electrode Positioning and Combustion Checks

Positioning ignition electrode, checking combustion, and activating flue-sweeper function.

Heat Exchanger and Filter Maintenance

Information on pump performance, disassembling DHW heat exchanger, and cleaning water filter.

Annual Service and System Checks

Boiler Schematics

Wiring Diagrams

Technical Data

Related product manuals