Need help?Do you have a question about the Baxtran BS Series and is the answer not in the manual?
Guidelines for optimal placement and environmental conditions for scales.
Specific installation details for the BS/BSI series, including power options.
Procedure for setting the zero point and automatic rezeroing function.
How to perform tare operations, including multiple tares and net weight.
Steps to switch between different weight units like kg and lb.
Method to access the scale's configuration and calibration parameters.
Step-by-step guide for calibrating the scale using reference weights.
How to adjust the scale's readability or division increment.
Procedure to verify the scale's internal counting values.
Options for configuring the LCD backlight (automatic, off, on).
How to select and set the preferred weighing units.
Configuration of the automatic power-off (sleep) function.
Procedure to change the scale's maximum weighing capacity, including password entry.
Setting the acceptable range for automatic zero adjustments.
Adjusting the weighing speed or response time.
How to reset the scale to its factory default settings.
Method to set or adjust for local gravity variations.
To Next Page
General
