Bay-tec Piper J-3 Cub User Manual

B1
B1
B2
B3
B4 B5
B6
B7 B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
T0
Piper J-3 Cub
Accessories
How to Assemble the Fuselage
F-36-1
F-36-1
F-0 F-3F-4
F-5
F-6
F-7
F-8
F-36
F-36
F-20
F-21
F-22
F-2
F-1
F-2-1
F-0-1
F-24-4
F-24-3
F-24-2
B-16 B-15 B-13
Specification:
Wingspan: 1800mm
Fuselage Length: 1150mm
Flying weight: 2.2-2.6kg
Suggested Equipment:
Motor: 4250(3520) 600KV
ESC: 60A
Servo: 17g x4 (EP version)
17g x5 (GP version)
Propeller: 12-14 inch
Battery: 4-6S 3000-6000mAh
Radio :more than 4CH
GP: 50-60 class methanol
or same class engine
Balsawood Airplane
B1.B22. Front Landing Gear
B2. Back Landing Gear
B3. Balsa wood sheet
B4.B6. Wood Brace for screw-assembly
on the wing
B5. Wood Brace for screw-assembly on
the front landing gear
B7. Carbon Tube 12mm*110mm
B8. Carbon Tube 12mm*124mm
B9. Wheel
B10. Cowl
B11. Cabin Canopy
B12. Servo horn
B13.B14.B15.B16. PVC window sheet
B17.B27 Wing Bracket
B18. B19.B23 Servo Pull Rod
B20. Cabin Door Hinges
B21. Landing Gear Hinges
B24. Paper Hinges
B25. Set Screws; Linkage stoppers
B26. Carbon Tube 10mm*358mm
B28. Carbon Tube 6mm*746mm
B29. Paulownia Sheet

Bay-tec Piper J-3 Cub Specifications

General

Brand	Bay-tec
Model	Piper J-3 Cub
Category	Toy
Language	English

Summary

Accessories

Front Landing Gear

Part B1 and B22, the front landing gear assembly.

Balsa Wood Sheet

Part B3, a component made of balsa wood.

Wing Braces

Parts B4 and B6 for screw-assembly on the wing.

Landing Gear Braces

Part B5 for screw-assembly on the front landing gear.

Carbon Tubes

Parts B7 (12mm*110mm) and B8 (12mm*124mm) for structural elements.

Cowl and Canopy

Part B10 is the cowl, B11 is the cabin canopy.

Servo Components

Parts B12 (servo horn) and B18, B19, B23 (servo pull rods).

Window Sheet

Parts B13, B14, B15, B16, PVC window sheet.

Wing Brackets

Part B17, a bracket for wing attachment.

Cabin Door and Landing Gear Hinges

Parts B20 (cabin door hinges) and B21 (landing gear hinges).

Paper Hinges and Set Screws

Parts B24 (paper hinges) and B25 (set screws, linkage stoppers).

Carbon Tubes for Structure

Parts B26 (10mm*358mm) and B28 (6mm*746mm) carbon tubes.

Paulownia Sheet

Part B29, a sheet made of Paulownia wood.

How to Assemble the Fuselage

Fuselage Frame Assembly

Step-by-step visual guide for assembling the fuselage structure using labeled parts.

Fuselage Side Panels

Detailed images showing the construction of fuselage side panels.

Fuselage Framework Details

Close-up views of fuselage framework assembly and part integration.

Fuselage Top and Bottom Sections

Assembly of the upper and lower parts of the aircraft fuselage.

Fuselage Reinforcement

Illustrations showing the placement of carbon tubes and paulownia sheets.

How to assemble the Landing Gear

Landing Gear Attachment

Instructions for attaching the front landing gear components.

Wheel Installation

Steps for mounting the wheels (B9) onto the landing gear.

Tail Wheel Assembly

Procedure for assembling and attaching the tail wheel (B2).

How to assemble the wing and parts

Wing Assembly Overview

Visual guide for assembling the main wing structure.

Wing Bracket Installation

Mounting wing brackets (B17) to the fuselage structure.

How to assemble the Horizontal Tail Wing

Horizontal Stabilizer Construction

Detailed diagram for assembling the horizontal tail wing.

Tail Wing Linkage Wire

Installation of the 2mm linkage steel wire for the tail wing.

How to assemble the Vertical Tail Wing

Vertical Stabilizer Construction

Diagram showing the assembly of the vertical tail wing.