Bayer HealthCare MEDRAD Vistron Plus User Manual

MN090004 Rev E
1/34
Disposable sets and Connector Tubing
INSTRUCTIONS FOR USE
Catalog No. Description
ZY6320 190 ml Syringe with quick ll tube (QFT)
ZY6321 190 ml Syringe with spike
ZY6322 190 ml Syringe with quick ll tube (QFT)
ZY6323 190 ml Syringe with spike
ZY6324 190 ml Syringe with spike
150 cm connecting tube
ZY6325 190 ml Syringe with quick ll tube (QFT)
150 cm connecting tube
ZY5151 150 cm Extension tube single
ZY5152 150 cm Extension tube T-connector
Language Page
English 13
Deutsch 13
Français 14
Italiano 14
Ελληνικά 15
Svenska 15
Nederlands 16
Dansk 16
Norsk 17
Tiếng Việt 17
Slovenský 18
Español 18
日本語 19
Slovenščina 19
Български 20
Srpski 20
Polski 21
Türkçe 21
Magyar 22
Hrvatski 22
简体中文  23
Русский 24
Português 25
Lietuvių k. 25
한국어  26
Қазақша 26-27
Українська 27-28
Česky 28
Eesti keel 29
Latviešu 29
Македонски 30
Română 30
Bahasa Indonesia 31
July 07, 2021
Imaxeon Pty Ltd
Unit 1, 38-46 South Street
Rydalmere NSW 2116
Australia
Bayer Medical Care B.V.
Avenue Céramique 27
6221 KV Maastricht
The Netherlands
Salient
Contrast Injection System
Vistron Plus
2797
0°C
+45°C
10% RH
90% RH

Bayer HealthCare MEDRAD Vistron Plus Specifications

General

Category	Medical Equipment
Manufacturer	Bayer HealthCare
Brand	MEDRAD
Model	Vistron Plus
Flow Rate Range	0.1 to 10 mL/sec
Pressure Limit	325 psi
Syringe Size	200 mL
Power Requirements	100-240 V AC, 50/60 Hz
Type	CT Injection System
Weight	Approximately 15 kg

Summary

Safety Information

Important Safety Notice

Device intended for trained individuals experienced in diagnostic imaging studies.

Intended Use

The contents of this package are intended to be used in the delivery of contrast media or saline.

Contraindications

Not for multiple patients, drug infusion, chemotherapy, or other unindicated uses.

Restricted Sale

Rx Only

General Warnings

Covers hazards like air embolism, contamination, and improper handling.

General Cautions

Notes on component damage, leaks, and proper installation.

Syringe Operations

Installing a Syringe

Steps to correctly install the syringe into the injector head.

Filling with Spike

Instructions for using the spike to fill the syringe.

Removing a Syringe

Steps for safely detaching and disposing of the syringe.

Connector Tube Installation

Instructions for connecting the tubing to the syringe securely.

Loading and Priming Syringe with QFT

Instructions for loading and priming syringes using a Quick Fill Tube (QFT).