BBK 1763 - Final Installation and Connections

Step 12 Check the throttle body for smooth action by opening and closing the aps a few times
with your ngers. You should feel a slight drag from the electric motor, but it should never bind or stick.
Step 13 V-10 truck applications- install the supplied adapter plate and all (4) supplied bolts.
Refer to to engraving on adapter plate for corrrect mounting.
GT 500-
Install the throttle body onto the intake manifold using (2) of the shorter supplied bolts
on the top mounting holes, and the original nuts on the bottom then re-establish the wiring connections.
Step 14 Re-install the intake hose and re-attach the PCV tube.
Step 15
Connect the (–) negative battery terminal
ASSEMBLY PHOTOS
w w w . B B K P E R F O R M A N C E . c o m
IMPORTANT- All appropriate safety equipment(i.e: gloves,tools) must be used during the installation of these product(s).
BBK Performance, Inc. accepts no responsibilty for injuries resulting in the installation of any product(s).
MORE ON
THE BACK
Motor Housing
Plastic capped
spring
Throttle Postion
Sensor
Removable cap
(removed from housing)
DO NOT
REMOVE!