Specifications
1. 480p Video output over HDMI.
2. RGB/VGA switch to select the 15khz RGB mode or the 31khz VGA mode.
3. HDMI connector for plugging to your TV/monitor.
4. Headphone audio output jack for plugging to a Hi-Fi system(amplifier) or TV.
5. Scanliner ON/OFF switch to turn it on or off.
6. Scanliner Width switch for selecting thin or thick scanlines.
7. Scanliner Even/Odd switch for selecting even or odd scanlines.
8. Luminosity adjustment as a bonus feature.
9. Blue power led.
10. High quality custom made Dreamcast audio/video cable.
11. Durable plexi case with laser etched Akura logo.
12. Small form factor: 2.9x2.9x0.71 inches or 7.5x7.5x1.8 cms
Parts
* Parts list as figured on the 2nd page.
1. Dreamcast AV plug.
2. Dreamcast AV cable.
3. HDMI Connector for audio/video output.
4. Headphone audio output jack.
5. Scanliner feature ON/OFF switch to turn it on or off.
6. VGA/RGB mode select switch. (15/31khz).
7. Scanliner Width Select switch for selecting thin or thick scanlines.
8. Scanliner Even/Odd Select switch for selecting even or odd scanlines.
9. Firmware updating connector.
10. Blue power led.
To Next Page
Loading...