PRIMARY INSTRUCTIONS
1. Make sure your TV and Dreamcast is turned off
2. Connect your Akura's Dreamcast AV plug (1) to your console’s AV port on the back.
3. Connect your HDMI cable (male to male, not included) between your Akura (3) and your
display (plasma, LCD, monitor etc.)
4. (Optional) You can also get stereo sound from your DC through the headphone jack(4), so
you can use your amplifier for a better gaming experience. You should turn off your stereo
system (amplifier) before connecting your cables to eliminate the risk of damaging your
speakers. Please don't connect 2 speaker systems (TV+Ampifier) at the same time... Use
either HDMI or headphone jack for audio output.
5. Adjust the settings (RGB mode/scanlines) you prefer by the help of switches.
6. Turn on your TV and Dreamcast (amplifier too) and enjoy your VGA box with different
settings.
To Next Page
Loading...