Need help?Do you have a question about the BC Biomedical SA-2010S and is the answer not in the manual?
General| Operating Temperature | 10 - 40 °C |
|---|---|
| IBP Static | -10 to 300 mmHg |
| NIBP Neonate | 30 - 150 mmHg |
| Battery | Rechargeable |
| Measurement Range | Device specific |
| Resolution | Device specific |
| Accuracy | Device specific |
| Sample Volume | Device specific |
| Measurement Time | Device specific |
| Power Supply | 100 - 240 VAC, 50/60 Hz |
| Memory | Yes |
| Arrhythmia Waveforms | Same as ECG Waveforms (as they are ECG arrhythmias) |
Lists and describes the different regional configurations of the SA-2010S.
Describes optional features such as RS-232 serial communications.
Lists the accessories included with the SA-2010S unit.
Lists optional accessories available for purchase to enhance the SA-2010S functionality.
Explains the function of various keys, LEDs, and indicators on the analyzer.
Explains the LCD display and the universal patient lead connectors.
Details how to select analyzer functions and test loads.
Explains controls for the DUT test receptacle and power outlet status.
Details patient lead selection and waveform generation controls.
Details various connectors, self-test snaps, and the protective fuse.
Describes the optional RS-232 communication port for PC interfacing.
Guides on test preparation, including receptacle wiring confirmation.
Explains how to perform Mains Voltage and Device Current measurements.
Covers Earth Resistance, Earth/Ground Leakage, and Enclosure Leakage tests.
Details tests for Lead to Earth/Ground Leakage, Lead to Lead Leakage, and Lead Isolation.
Explains measuring leakage and isolation current between two points.
Details how to measure resistance between two points.
Explains simulation of Normal Sinus Rhythm pulses at various BPMs.
Details Sine, Square, and Triangle wave generation for testing.
Outlines the serial port configuration for PC communication.
Explains the command syntax and hierarchical structure for controlling the analyzer.
Provides a summary of commands for configuring and controlling the SA-2010S-R.
Lists the revision history and changes made to the user manual.
Details the warranty terms and conditions for the SA-2010S.
Lists specifications for Mains Voltage, Device Current, Earth Resistance, and Leakage Current.
Outlines patient simulator parameters, line voltage, and DUT capacity.
Provides physical dimensions, weight, and operating/storage environmental ranges.
Provides general notes and remarks related to the SA-2010S.
To Next Page
