BCP SKY2365 - Install Tank Seat Frame; Attach Burner Assembly to Tabletop

6 |
PRODUCT ASSEMBLY
2
Route the part 6 tank strap through the part E tank seat frame.
Open the door and attach the tank seat frame to the panels with four part 2 screws.
NOTE: Align numbers on the tank seat frame with the corresponding numbers on the panels.
3
Remove the screws/washers from the part G burner assembly and insert it into the part F tabletop.
Replace the screws/washers to attach the burner assembly to the tabletop.
6
x4
2
E
F
G