HARDWARE
| 3
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or
factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
NOTICE
TOOLS REQUIRED
APPROXIMATELY
30 MIN.
ASSEMBLY
2 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER
SMALL
WRENCH
HANDLE
J
1 PC
I
3 PCS
LATCH
M3 X 12MM
SCREW
H
18 PCS
M3.5 X 30MM
SCREW
E
16 PCS
M3.5 X 25MM
SCREW
F
10 PCS
A
4 PCS
M3 X 38MM
SCREW
B
24 PCS
M3.5 X 40MM
SCREW
M3.5 X 50MM
SCREW
D
6 PCS
M3 X 16MM
SCREW
C
6 PCS
M3 X 12MM
BOLT SET
G
1 PC
To Next Page
Loading...
