2 |
HARDWARE
1
12 PCS
M8 X 70mm
BOLT SET
M6 X 70mm
BOLT SET
M6 X 50mm
SCREW
2
18 PCS 6 PCS
M4 X 60mm
SCREW
4
6 PCS
3
5
5 PCS
M4 X 50mm
SCREW
M8 END CAP M6 END CAP
6
24 PCS
1
18 PCS
7
TOOLS REQUIRED
APPROXIMATELY
45 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER
500 LBS
BENCH
CAPACITY
LBS
NOTICE
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
WRENCH
To Next Page
Loading...