EasyManua.ls Logo

BCP SKY4893 - Product Care and Troubleshooting; Resetting Team or Gun; Adding Life Indicators; Troubleshooting Common Issues

BCP SKY4893
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CARE
COMPATIBLE SETS
With the ability to mix and match Best Choice Products Laser Force Guns, you’ll have more than enough
guns for your next event, birthday party, or family reunion!
RESET TEAM/GUN
A player cannot change teams or reset a gun during a game.
Anti-cheat function: To change teams or reset a gun, a player on an opposing team must point at your
gun and hold down the team selection button. The gun will say “full blood resurrection” and you will be
able to select a dierent team.
ADD LIFE
During a game, you can gain a life indicator by holding the team selection button. The gun will say “full
blood resurrection” and a life indicator will be added to your life.
You can add up to 3 life indicators per game.
NOTE: Do not point at an opposing team’s gun while adding life because it may reset the opponent’s
team/gun.
If unused for a long period of time, remove the batteries.
If necessary, clean this product with a damp cloth.
| 5
REASON
Low battery
Infrared signal could not reach the
blaster because the distance is too far
or angle is wrong
Obstacles blocking the infrared signal
Low battery
Overexposure to direct sunlight
Competing infrared transmission from
other devices, such as TV remotes
TROUBLESHOOTING
PROBLEM
Blasters do not work
Blasters operate
automatically
SOLUTION
Replace the batteries
Reduce the firing distance and firing angle
Remove the obstacles
Replace the batteries
Block sunlight or play in an area
without direct sunlight
Stop using or move away from
competing infrared devices
NOTE: If normal operation of the product is disturbed or interrupted, strong electro-magnetic interference
may be causing a problem. Reset the product by turning it completely o and then back on. If normal
operation does not resume, try replacing the batteries and moving the product to another location.

Related product manuals