To Next PageTo Next Page
Need help?Do you have a question about the BCS PowerSafe 728 PS and is the answer not in the manual?
Explains symbols used for safety warnings on the machine and in the manual.
Provides crucial safety advice regarding engine operation, moving parts, and battery handling.
Illustrates and lists various safety and control labels found on the machine.
Describes engine types, power, and RPMs, referring to Table 2.
Details the Powersafe® mechanically-controlled, hydraulic clutch.
Describes brake types and controls for different models.
Explains the gear change system, including oil immersion and inversion types.
Explains the Powersafe® clutch safety function and its automatic reverse speed dog.
Advises periodic battery fluid level checks and charging.
Instructs to check engine oil level following the manual and top-up with specified oil.
Details checking gearbox oil level and topping up with BCS PowerLube W7 SAE80W-90.
Guides on refuelling the tank using a funnel with a filter, never while the engine is running.
Emphasizes familiarizing with controls, safe shutdown, and safety warnings before use.
Covers operating speeds, gear changes without clutch, and emergency stop procedures.
Refers to engine manual for maintenance intervals and oil level checks.
Provides instructions for oil changes every 100 hours or annually, filter replacement, and cleaning the magnetic cap.
Lists checks for a gasoline engine that fails to start.
Lists checks for a diesel engine that fails to start.
Troubleshooting step for when the machine fails to move.
Continues clutch adjustment steps, emphasizing caution and authorized service.
Continues the adjustment procedure for the reverse control lever.
Instructs to provide the complete part code and machine serial number when ordering.
General
