Maintenance
The shifter is built for speed and durability, but like any car it
can perish if abused or not looked after.
The shifter comes pre lubricated, although we would
recommend adding some a lithium based grease into the top of
the ball joint in the lower gear stick housing.
PIC OF THIS AREA
If it looks like the lubrication has dried, the ball joint feels rough or
it has been over a year since last adding lubrication after regular
use, we recommend smearing a tiny amount (half a pea) lithium-
based grease onto the top of the joint and moving through the
gears so the parts all get a coating.
We’d recommend regular dusting and cleaning of the shifter
Do not lift the gear leaver upwards, this can cause issues with the
mechanism.
Re tighten all the bolts on your sim rig, including the shifter bolts
mounting your shifter regularly.
To Next Page
Loading...