This document is an operator's manual for BE Power Equipment portable generators, covering models BE3800, BE4800, BE7000, and BE9000. It provides comprehensive information on set-up, operation, maintenance, troubleshooting, and warranty.
Function Description:
The BE Power Equipment generators are designed to provide portable electrical power. They are constructed and tested for optimum performance and quality, suitable for various applications. The generators are EPA and CARB Compliant, ensuring they meet environmental standards. They feature an internal grounding or floating bonded neutral design to reduce the risk of electric shock in case of malfunction.
Important Technical Specifications (across models, where applicable):
- Rated Power (Kw): Ranges from 3.0 (BE3800) to 6.9 (BE9000).
- Max Power (Kw): Ranges from 3.8 (BE3800) to 9.0 (BE9000).
- Engine Model: 170F/P (BE3800), 170F/P-1 (BE4800), 180F/P-2 (BE7000), 188F/P (BE9000).
- Valve Clearance: Intake 0.10~0.15 mm, Output 0.15~0.20 mm.
- Stroke x Bore (mm): 70x55 (BE3800, BE4800), 80x62 (BE7000), 88x64 (BE9000).
- Engine Type: All models use a 4-stroke engine.
- Displacement (cm³): 212 (BE3800), 223 (BE4800), 312 (BE7000), 389 (BE9000).
- Gas Distribution Mode: OHV (Overhead Valve) for all models.
- Cooling Mode: Air cooled for all models.
- Rated Speed (Rpm): 3600 for all models.
- Starting Method: Recoil Start for all models.
- Fuel Tank Volume (Gallon): 3.96 (BE3800, BE4800), 5.28 (BE7000, BE9000).
- Fuel Type and Grade: Unleaded 87+ Octane.
- Oil Capacity (ml): 600 (BE3800, BE4800), 800 (BE7000), 1000 (BE9000).
- Oil Type: SAE 10W-30 (recommended for all models). SAE-0W30 is recommended for colder climates.
- Noise Level @ 7m (25% load): 70 dB (BE3800, BE4800), 68 dB (BE7000), 66 dB (BE9000).
- Rated Voltage (V): 120 (BE3800), 120/240 (BE4800, BE7000, BE9000).
- Rated Frequency (Hz): 60 for all models.
- Rated Power Factor: 1 for all models.
- Phase Number: Single Phase for all models.
- Run Time @25% (hours): 15.3 (BE3800), 14.9 (BE4800), 13.5 (BE7000), 11.5 (BE9000).
- Fuel Consumption Rate (25%) (L/h): 0.98 (BE3800), 1.0 (BE4800), 1.11 (BE7000), 1.3 (BE9000).
- Fuel Consumption Rate (100%) (L/h): 1.8 (BE3800), 2 (BE4800), 2 (BE7000), 2.63 (BE9000).
- THD (Total Harmonic Distortion): ≤23% for all models.
- Net Weight (lb.): 98.5 (BE3800), 102.8 (BE4800), 130 (BE7000), 168.8 (BE9000).
Usage Features:
- Control Panel: Features a Light Switch, LED Light, Engine Switch, Low Oil Indicator, Carbon Monoxide Alarm, Main Breaker, AC Protectors, and various outlets (120V AC 20A 5-20R, 120/240V AC 30A L14-30R). BE7000 and BE9000 models also include a 12V DC Outlet and DC Protector.
- Voltage Switch: Available on BE4800, BE7000, and BE9000 models, allowing users to switch between 120V and 240V output.
- ECO Mode (BE9000 only): When activated, the engine conserves fuel by sensing the necessary load and running at a lower RPM.
- Fuel Primer: Recommended for easier starts in cold environments or after extended periods of non-use, by pumping small amounts of fuel into the engine.
- Magnetic Oil Dipstick: A multipurpose dipstick that absorbs iron filings and allows for checking oil levels.
- Wheels and Handles (BE4800, BE7000, BE9000): Flat-free wheels and handles facilitate easy transport over rough terrain. The BE3800 does not include these features.
- Safety Features: Carbon Monoxide Alarm (flashing red for dangerous buildup, flashing yellow for sensor malfunction), Low Oil Indicator (red light for low oil), AC Protectors (trip and block current if overloaded), and Main Breaker (interrupts current if circuit is overloaded).
- Ground Terminal: Used to externally ground the generator for added safety.
Maintenance Features:
- Maintenance Schedule: A detailed schedule outlines regular checks and replacements for engine oil, air filter, spark plug, spark arrestor, idle speed, valve clearance, fuel tank and filter, fuel line, and cylinder head/piston.
- Engine Oil Service: Instructions for draining and refilling engine oil, with recommendations for SAE 10W-30 oil (or SAE-0W30 for colder climates). Oil changes are recommended every 25 hours in high-temperature or high-load environments.
- Air Filter Service: Instructions for cleaning or replacing the air filter, with recommendations for more frequent cleaning (every 10 hours) in dusty or harsh environments.
- Spark Plug Replacement: Step-by-step guide for removing, inspecting, cleaning, and replacing the spark plug, including recommended gap (0.7-0.8mm) and torque specifications.
- Fuel Filter Cleaning: Instructions for removing and cleaning the fuel tank cap and fuel filter screen.
- Storage and Transport: Procedures for long-term storage (draining fuel, burning off remaining fuel, oil change, closing valves) and transport tips (avoid overfilling fuel tank, do not operate during transport, avoid direct sunlight).
- Troubleshooting Table: Provides common problems, possible causes, and solutions for issues related to fuel, ignition, compression, engine oil, and attached devices.
- Warranty: Electronics are covered for one year, and the engine for two years (extendable to five years upon product registration). The warranty covers substantial defects in material and workmanship but excludes transportation costs, damage from abuse/misuse, normal wear and tear, and unauthorized repairs.
Need help?
General
To Next Page
