BE QUIET! LIGHT WINGS

Need help?

Do you have a question about the BE QUIET! LIGHT WINGS and is the answer not in the manual?

Summary

Screw down the fan using the provided fan screws for mounting.

Connect the fan's ARGB connector to the motherboard's 5V ARGB header.

Securely screw down the fans using the included fan screws.

Connect fans to the ARGB Hub for synchronizing up to six 5V ARGB devices.

Details on who the non-transferable warranty applies to and proof of purchase.

Explains the duration of warranty for products and replaced items.

Lists items not covered, including wear, modifications, and accidental damage.

Limits liability to repair/replacement, excluding consequential damages.

States no other warranties, expressed or implied, beyond the specified length.

Describes how local laws grant specific legal rights alongside the warranty.

Confirms no be quiet! employee or dealer can modify warranty terms.

Guidance on obtaining technical support and warranty service.

General

Type	Fan
Airflow	70.53 m³/h
Bearing type	Rifle bearing
Fan diameter	120 mm
Maximum airflow	41.51 cfm
Quantity per pack	3 pc(s)
Suitable location	Computer case
Maximum air pressure	1.66 mmH2O
Rotational speed (max)	1700 RPM
Noise level (high speed)	20.6 dB
Mean time between failures (MTBF)	60000 h
Pulse-width modulation (PWM) support	Yes
Fan connector	4-pin
Product color	White
Illumination color	Multi
Voltage	5 - 13.2 V
Rated voltage	12 V
Power consumption (typical)	4.56 W
Package type	Box
Number of screws	16
Sustainability certificates	CE, RoHS, Triman, UL ECOLOGO, WEEE
Shipping (inner) case width	283 mm
Shipping (inner) case height	200 mm
Shipping (inner) case length	454 mm
Shipping (inner) case weight	8910 g
Quantity per shipping (inner) case	10 pc(s)

Weight and Dimensions