EasyManua.ls Logo

BE BE-6500ER - Storage; Preparation for Storage

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Preparation for Storage
The following procedures should be followed prior to storage of your 
generator for periods of 6 months or longer.
1. Drain fuel from fuel tank carefully by disconnecting the fuel line. 
    Gasoline left in the fuel tank will eventually deteriorate making engine  
    starting difficult. Add fuel stabilizer to fuel tank.
2. Remove the drain screw of the carburetor. 
3. Change engine oil.
4. Check for loose bolts and screws, tighten them if necessary.
5. Clean generator thoroughly with clean cloth. NEVER USE WATER TO 
    CLEAN GENERATOR.
6. Pull recoil starter handle until resistance is felt, leaving handle in that 
    position.
7. Store generator in a well ventilated, low humidity area.
storage

Related product manuals