Beaba 920328 - User Manual

Questions and Answers

W
William ForbesAug 4, 2025
Why is the air flow weaker than before in my Beaba 920328?
- D
  Dennis ColemanAug 4, 2025
  Several factors can cause weak airflow in your Beaba Air Cleaner: * The plastic bag around the filter might not have been removed. Unplug the appliance and remove the plastic bag from the filter. * The speed may be set to “Low”. Press the “Speed” button to adjust the speed level. * The filter may need replacing. Replace the old filter with a new one. * There might not be enough space around the purifier’s ventilation. Ensure there is 40 cm of space around the purifier.
N
Nicole HarrisAug 11, 2025
What to do if my Beaba Air Cleaner has low performance or poor purification?
- E
  Emily AdkinsAug 11, 2025
  If your Beaba Air Cleaner isn't performing well, consider these points: * The room might be too large for the purifier's capacity. Use the purifier in a room with the appropriate surface area. * The air inlet or outlet could be blocked. Remove any objects in front of the air inlet or outlet.
J
Jacob KingAug 16, 2025
How to fix a Beaba 920328 that does not work?
- V
  Valerie ThomasAug 16, 2025
  If your Beaba Air Cleaner isn't working, the plug might not be properly connected. Unplug it and plug it in again.
T
Tracy WheelerAug 23, 2025
What to do if the 'filter' icon is still on after replacing the filter on my Beaba 920328 Air Cleaner?
- O
  oscar63Aug 23, 2025
  If the “filter” icon remains on after replacing the filter in your Beaba Air Cleaner, the filter's lifespan reset might be incorrect. To reset it, press the “Replace Filter” button for 3 seconds until the filter light goes out.
J
Jacob GarciaAug 29, 2025
Why doesn't my Beaba 920328 remove odours from the room?
- R
  Robin HunterAug 29, 2025
  The Beaba Air Cleaner eliminates odors in the air, not odors from furniture or furnishings. Clean the furniture to remove any odors from it.