What to do if I hear a long beep from my Beaba BIB EXPRESSO BEA0206?
If you hear a long beep from your Beaba Bottle Warmer, it means a cycle was started without water in the tank. Please wait a few minutes before adding water to the tank.
Why is all the water flowing before the cycle starts in my Beaba Bottle Warmer?
If all the water flows out of your Beaba Bottle Warmer before the cycle starts, check that the water distribution lever isn't blocked and pull it up. Also, check for limescale deposits that might be preventing the appliance from functioning correctly.
What does it mean when all the buttons are flashing on my Beaba BIB EXPRESSO BEA0206?
If the buttons on your Beaba Bottle Warmer are flashing, it could be due to the appliance being in default mode or because there is no water in the unit when starting the cycle. For further assistance, it is recommended to contact Beaba’s after-sales service.
Why is the water not hot enough in my Beaba BIB EXPRESSO BEA0206 Bottle Warmer?
If the water in your Beaba Bottle Warmer is not hot enough, check that limescale deposits are not preventing the appliance from functioning properly. For further assistance, it is recommended to contact Beaba’s after-sales service.
General| Type | Bottle Warmer |
|---|---|
| Heating Time | 30 seconds |
| Capacity | 1 bottle |
| Automatic Shut-off | Yes |
| Auto-Stop | Yes |
| Audible alarm | Yes |
| BPA Free | Yes |
| Defrosting Function | Yes |
| Keep Warm Function | Yes |
| Material | Plastic |
| Voltage | 220-240 V |
| Features | Defrosting, Keep warm |
| Functions | Sterilization |
| Sterilization time | 8 minutes |
| Model | BIB EXPRESSO BEA0206 |
Key safety warnings including burn risks and operational cautions.
Information on who can use the appliance and its intended household applications.
Rules regarding power cord, supervision, and appliance damage.
Guidelines to keep children away from the appliance and its maintenance.
Advice on hygiene, appliance placement, operation, and food preparation.
Steps for initial setup, including rinsing the heating unit with a Bain Marie cycle.
Detailed steps for using the instant preparation mode to prepare bottles.
Explanation of Bain Marie mode for heating bottles and jars, with mode options.
Instructions for using the Bain Marie mode to heat bottles or jars.
Instructions for general cleaning and descaling the appliance with vinegar.
Troubleshooting guide for common problems like non-working appliance or flashing buttons.
To Next Page
