20
Container
Initial
temperature
Volume of milk
60 ml 90 ml 120 ml 150 ml
Plastic portion Frozen 1h 1h15 1h 2h
Storage bag Frozen 1h 1h30 2h 2h30
* These recommendations are based on the test with the use of the BEABA
portions and the default temperature at 37°C. The warming time above includes
already the time needed to defrost and to reheat the milk to 37°C.
Note :
Check the instructions of your milk storage bag and make sure that it can be
reheated in the bottle warmer.
Heating time varies with different brands of containers and materials. The volume
of baby milk to be heated has also a signicant impact. If the baby milk is not hot
enough, put it back in the appliance and restart the mode to heat again for few
minutes.
STERILIZE MODE
The Sterilize mode is used to sterilize baby bottles or paciers,
1. Pour 100-150ml water into the bottle warmer.
2. Place the lift-out basket into the bottle warmer rst, then put the bottle and
nipple upside down into the bottle warmer.
3. Always check that the water volume doesn’t exceed the maximum line.
4. Put the lid on.
5. Press the Sterilize mode button.
6. When the time indicator ashes, press the setting button +/- to choose the
working time. (5-20 mins). The default time is 10 mins.
7. The temperature of this mode is by default 100°C and can’t be customized.
8. The bottle warmer will start working after the time indicator ashes twice. The
Sterilize mode button keeps ashing and time indicator is counting down while
this function is working.
9. The bottle warmer will beep 5 times at the end of countdown.
BE CAREFUL, RISK OF BURNING
.
To Next Page
Loading...
