19
twice. The Water bath mode button keeps ashing. The control panel shows
the real time water temperature while the product is working.
8. When the desired temperature is reached, the appliance beeps 5 times and
then switches to keep-warm mode until the selected time has elapsed.
Note: it takes about 20-25 minutes in bain-marie mode for the bottle to reach the
desired temperature.
BE CAREFUL, RISK OF BURNING
Always check that the temperature of
the milk is not too high and that there is no risk of burning your child.
Note : After preparation ,the bottle should be consume within 30 min. Discard
any unnished baby bottle, and do not reheat a second time.
DEFROST MODE
The Defrost mode is used to defrost gradually the frozen breast milk until it arrives
at the desired temperature (22°C-42°C). This preserves the nutrients, proteins
and antibodies of breast milk.
1. Pour water into the bottle warmer (level max).
2. Place milk storage bag and lift-out basket into the bottle warmer.
3. Press the ON/OFF button.
4. Press the Defrost mode button.
5. When the temperature indicator ashes, press the setting button +/- to choose
the temperature as desired (22°C-42°C). The default temperature is 40°C.
6. If you want to customize warming time, press again the Defrost mode button.
When the time indicator ashes, press the setting button +/- to choose the
working time (1 -6hours) . The default time is 2 hours.
7. The bottle warmer will start working after the temp/time indicator ashes
twice. The Defrost mode button keeps ashing. The control panel shows the
real time water temperature while the product is working.
8. The bottle warmer will beep 5 times at the end of countdown.
BE CAREFUL, RISK OF BURNING
Always check that the temperature of
the milk is not too high and that there is no risk of burning your child.
Recommendations* for warming time in hours (only for Defrost mode) :
To Next Page
Loading...
