20
PROBLEM SOLVING
-
TROUBLESHOOTING
-
FAQ
The status LED does not light up
• Make sure that both units are switched on.
• Check the connection of the mains adapter to the wall power socket and the
unit.
• Exchange the batteries and/or check the polarity
The status LED flashes green
• The parent unit receives sounds. Turn up the volume on the parent unit to make
sure that you hear the sounds from your baby.
The status LED flashes red
• Long flashin: Batteries are flat. Replace the batteries or connect the unit to the
power supply.
• Short flashing: maximum range is exceeded. Reduce the distance between the
baby and the parent unit.
No sound transmission despite established connection
• The volume is set too low. Press the + button to increase the volume.
To Next Page
Loading...
