To Next PageTo Next PageWhy does my Beaba THERMOSPEED JPD-FR412 Thermometer display 'Er1'?
If your Beaba Thermometer displays 'Er1', it means the ambient temperature is either below 10°C (50.0°F) or above 40°C (104°F). To resolve this, take the measurement in an environment where the temperature is between 10°C (50.0°F) and 40°C (104°F).
What to do if my Beaba THERMOSPEED JPD-FR412 reading is too low?
If your Beaba Thermometer shows a temperature lower than the typical body temperature range, consider these possibilities: 1. The lens of the temperature probe might be dirty. Clean it gently using a cotton swab. 2. The thermometer probe might not be correctly aligned with the eardrum. Reposition it to ensure proper alignment. 3. The thermometer may have been recently moved from a cold environment. Wait for more than 30 minutes after moving it into the measurement environment before use.
What to do if my Beaba THERMOSPEED JPD-FR412 reading is too high?
If your Beaba Thermometer displays a temperature reading higher than the typical body temperature range, it could be due to a damaged temperature probe. Contact the manufacturer for assistance.
Identifies product, manufacturer, and user manual purpose.
Instructs to check package contents and for damage upon receipt.
Covers probe care, battery disposal, handling, and environmental conditions.
Explains normal variations and how to track for fever detection.
Covers probe tip, ambient temp, battery safety, ear canal safety, medical disclaimer.
Explains symbols and body temperature variations for fever detection.
Lists ranges by site and explains factors affecting temperature.
Describes product, components, principle, intended use, and key features.
Lists and shows numbered components of the thermometer.
Explains beep sounds and backlight colors for different temperature readings.
Details steps for powering on, selecting mode, inserting probe, and taking ear temperature.
Outlines steps for powering on, selecting mode, positioning, and taking forehead temperature.
Describes steps for powering on, selecting object mode, positioning, and measuring object temperature.
Explains 'HI' and 'LO' displays for readings exceeding or below limits.
Details how to view stored readings and clear memory data.
Describes how to use the sound switch button to toggle audio feedback.
Explains how to switch modes and temperature units.
Explains error codes and low battery symbol.
Instructs to remove the battery's insulating piece before first use.
Provides detailed steps for all measurement types.
Advises recalling readings, cleaning, storing, and lists important usage notes.
Guides on battery replacement, handling, and disposal.
Advises inspection and proper storage.
Details cleaning, disinfection, and common troubleshooting.
Explains error codes and issues with temperature readings.
Lists general specs, accuracy, resolution, operating environment, and dimensions.
Explains protection levels and storage/transportation advice.
States compliance with CISPR 11 and guidance on electromagnetic environment.
Details ESD, magnetic field, and radiated RF immunity test levels.
Provides formulas for separation distances and notes on RF interference.
Instructs on incident reporting and lists warranty terms and exclusions.
Provides the name and address of the authorized European representative.
General| Measurement Site | Forehead |
|---|---|
| Measurement Time | 1 second |
| Display | LCD |
| Fever Alarm | Yes |
| Memory | Yes |
| Power Source | Battery |
| Measurement Method | Infrared |
| Accuracy | ± 0.2 °C |
| Memory Function | Yes |
| Battery Type | 2 x AAA |
| Auto Power Off | Yes |
| Measurement Range | 32.0°C - 42.9°C |
