OPERATION
STORAGE
USER MAINTENANCE
To turn on the Beachwaver
®
, press and
hold the power button for 1 second.
Press the power button to cycle through 3 temperature
levels - L (low), M(medium), and H(high). It is important to
always select the proper heat settings for your hair type.
Low: 290ºF (150ºC)
Medium: 350ºF (180ºC)
High: 410ºF (210ºC)
TO TURN ON
Press the power button for three seconds
until all lights have turned off.
TO TURN OFF
CARING FOR YOUR BEACHWAVER
®
WHEN NOT IN USE
TO CHANGE TEMPERATURE
B-SERIES - DUAL VOLTAGE IRONS
USER GUIDE
WARRANTY
At The Beachwaver Co.
®
we want you to be thrilled with our tools. We want you to
look and feel beautiful. We believe in the quality of our tools and test each iron
thoroughly. We welcome your feedback and, in the event of any problem, we
welcome the opportunity to make it right!
At The Beachwaver Co.
®
will replace your styling iron for one year from the date
of purchase if the product is defective in materials or workmanship. In no event shall
be liable for any special, incidental or consequential damages for breach of this or any
other warranty, express or implied, whatsoever. Any implied warranties, obligations or
liabilities, including but not limited to the implied warranty of merchantability and fitness
for a particular purpose shall be limited to the one-year duration of this written
limited warranty. The warranty does not apply in the following scenarios: any
unauthorized party opened the product in an attempt to fix the product, normal
wear and tear, purchasing from an unauthorized seller, damage caused by miuse or
mishandling, or due to user error. Warranty application is determined in the sole
discretion of the Beachwaver Co.
®
PLEASE REGISTER YOUR TOOL FOR WARRANTY!
Please contact customerservice@beachwaver.com for information
on how to register your iron or to make a warranty claim.
Dual voltage. Type A /B plug.
08.2018 US /CAN
Turn off and unplug the curling iron. Allow the
iron to cool, and store out of reach of children in
a safe, dry location.
Never wrap the cord around the iron, as this may
cause premature wear of the cord and may lead
to cord damage that is not covered under
manufacturer’s warranty.
Handle the cord carefully to extend cord life,
and avoid jerking, bending or twisting the cord,
especially at the plug connection.
The Beachwaver
®
is virtually maintenance-free. If surface
becomes dirty, unplug iron and, when it is cool, wipe the
exterior with a cloth. If anything abnormal occurs, contact
Customerservicer@beachwaver.com for support. Do not attempt
to repair iron yourself.
Attempting to repair iron yourself voids warranty.
To Next Page
Need help?
General
