USER
MANUAL
CERAMIC ROTATING CURLING IRON
USER MAINTENANCE
STORAGE
The BEACHWAVER® is virtually maintenance-free. If surface becomes dirty, unplug iron and, when
it is cool, wipe the exterior with a cloth. If anything abnormal occurs, contact an authorized service
representative. Do not attempt to repair iron yourself.
Attempting to repair iron yourself voids warranty.
When not in use, turn off and unplug the curling iron. Allow the iron to cool, and store out of reach of children
in a safe, dry location. Never wrap the cord around the iron as this may cause premature wear of the cord and
may lead to cord damage that is not covered under manufacturer’s warranty. Handle the cord carefully to
extend cord life, and avoid jerking, bending or twisting the cord, especially at the plug connection.
At The Beachwaver Co.® we want you to be thrilled with our tools. We want you to look and feel
beautiful. We believe in the quality of our tools and test each iron thoroughly. We welcome your
feedback and, in the event of any problem, we welcome the opportunity to make it right!
The Beachwaver Co.® will replace your styling iron for one year from the date of purchase if the
product is defective in materials or workmanship. In no event shall The Beachwaver Co.® be liable
for any special, incidental or consequential damages for breach of this or any other warranty,
express or implied, whatsoever. Any implied warranties, obligations or liabilities, including but
not limited to the implied warranty of merchantability and tness for a particular purpose shall,
be limited to the one-year duration of this written limited warranty. The warranty does not apply
in the following scenarios: any unauthorized party opened the product in an attempt to x the
product, normal wear and tear, purchasing from an unauthorized seller, damage caused by misuse
or mishandling, or due to user error. Warranty application is determined in the sole discretion of
The Beachwaver Co.®
YOU MUST REGISTER YOUR TOOL TO BE ELIGIBLE FOR WARRANTY!
Please contact customerservice@beachwaver.com for information on
how to register your iron or to make a warranty claim.
WARRANTY
Stay connected! @TheBeachwaver
CHANGING ROTATION SPEED
Switch button upward for normal speed.
Switch button downward for slow speed.
OPERATION
To turn the BEACHWAVER® on, press and hold the ON/OFF button for 1 second. The temperature
will illuminate to 350ºF and can be adjusted by pressing the +/- buttons. It is important to
always select the proper heat settings for your hair type. To unlock and adjust temperature, press
the Power button until it beeps and use the +/- buttons.
Fine or damaged hair: 290ºF - 330ºF
Medium or normal hair: 330ºF - 370ºF
Thick or coarse hair: 370ºF - 410ºF
120V~ 60Hz
OUTLETS WITH TYPE
A/B PLUGS ONLY
Do not use with a
voltage converter
To Next Page
Need help?
General
