Need help?Do you have a question about the BeaconMedaes Gem 10 and is the answer not in the manual?
General| Brand | BeaconMedaes |
|---|---|
| Model | Gem 10 |
| Category | Touch terminals |
| Language | English |
Critical warnings about oil/grease usage and approved lubricants for safety.
Procedures for testing and commissioning the installed units.
Specifies placement, spacing, and mounting guidelines for wall/bed head units.
Details steps for installing terminal units on walls, including chasing and backplate fitting.
Instructions for installing terminal units within bed head trunking systems.
Guidelines for securing and mounting terminal units on pendants/booms.
Steps for physically fitting terminal units and connecting hose assemblies.
Procedure for final checks and commissioning after unit and hose installation.
Conditions for fitting the second fix assembly after first fix is complete.
Steps to prepare the first fix assembly by removing blanks and plugs.
Instructions for assembling the valve component and affixing the terminal unit label.
Procedure to verify the correct operation of the terminal unit using an AGS probe.
To Next Page