Need help?Do you have a question about the Beamz Pro LF1500 and is the answer not in the manual?
General precautions for safe operation, handling, and electrical connection.
Warnings regarding hot nozzle, steam, fluid handling, and placement to prevent burns.
Precautions on grounding, unit care, handling hot parts, and maintenance.
Information on product disposal and recycling according to environmental regulations.
Instructions for unpacking the product and checking for any shipping damage.
Information on connecting the unit to the correct power supply and voltage.
Steps for placing and preparing the unit for operation, including filling tanks.
Details on operating the unit via the LCD display, including output and interval settings.
Description of the wireless remote buttons and their corresponding functions.
Instructions for connecting and controlling the unit using a DMX controller.
Details the functions assigned to each DMX channel for control.
Recommendations for frequent cleaning and maintenance of the unit.
Step-by-step guide on how to safely replace a blown fuse.
Detailed specifications for LF1500, LF3000, and LF6000 models.
Information on the product's adherence to European Community Directives.
General| Power | 1500W |
|---|---|
| Heat-up time | 8 minutes |
| Output volume per minute | 1100 m³ |
| Control | DMX, Remote Control |
| Warm-up Time | 8 minutes |
| Power supply | 220-240VAC 50/60Hz |
To Next Page
