Need help?Do you have a question about the Beamz S2500 and is the answer not in the manual?
Covers precautions like not opening housing, handling mains lead, and repairs by qualified technicians.
Includes placement, ventilation, LED safety, and general usage guidelines to prevent accidents.
Addresses direct eye exposure to LEDs, CE certification, and required operating temperature range.
Unpack, check contents, and connect to a protected circuit with proper ground. Ensure mains voltage matches specifications.
Follow national norms, use stable surface, adequate ventilation, and safe mounting. Never aim smoke at people or animals.
Use Beamz water-based fluid for trouble-free operation and to prevent damage.
Adjust manual volume, interval, duration, DMX address, LED program, speed, and temperature settings.
Select between Timer, Manual (locked), and Manual (100% output) modes for fog emission.
Connect DMX controller, chain units, and set the start address to avoid channel overlap.
Run clean procedure in a ventilated area using cleaner fluid after 40 operating hours.
Details the function, value range, and description for each of the 8 DMX channels.
Lists rated voltage, heating element power, LED type, heat up time, DMX channels, dimensions, and weight.
Provides manufacturer details, product number, description, and trade name.
Lists applicable standards and directives met by the product.
Covers precautions like not opening housing, handling mains lead, and repairs by qualified technicians.
Includes placement, ventilation, LED safety, and general usage guidelines to prevent accidents.
Addresses direct eye exposure to LEDs, CE certification, and required operating temperature range.
Unpack, check contents, and connect to a protected circuit with proper ground. Ensure mains voltage matches specifications.
Follow national norms, use stable surface, adequate ventilation, and safe mounting. Never aim smoke at people or animals.
Use Beamz water-based fluid for trouble-free operation and to prevent damage.
Adjust manual volume, interval, duration, DMX address, LED program, speed, and temperature settings.
Select between Timer, Manual (locked), and Manual (100% output) modes for fog emission.
Connect DMX controller, chain units, and set the start address to avoid channel overlap.
Run clean procedure in a ventilated area using cleaner fluid after 40 operating hours.
Details the function, value range, and description for each of the 8 DMX channels.
Lists rated voltage, heating element power, LED type, heat up time, DMX channels, dimensions, and weight.
Provides manufacturer details, product number, description, and trade name.
Lists applicable standards and directives met by the product.
General| Power | 2500W |
|---|---|
| Remote Control | Yes |
| DMX Compatibility | Yes |
| Control | DMX |
| Power supply | 220-240V / 50Hz |
| Heating Time | 8 minutes |
To Next Page
