8
3. Appointment cancellation: in the appointment setting state, you can press the "appointment"
key again to cancel the appointment state; in the appointment work, you can press the "start /
cancel" key to cancel the appointment and return to the standby mode.
7
、时间：
7. Time:
可调节预约时间和功能工作时间，每按一下，每按
“
时间
”
键一下，小时键步进
1
小时，功能
工作时间分钟键步进
0
分钟，预约时间分钟键步进
30
分钟，到达最大设定参数值时跳至最
小参数值继续循环，长按
“
时间
”
键时间以
0.2
秒
/
次的速度快速循环增加。
The appointment time and function working time can be adjusted. Each time you press the
"time" key, the hour key will step forward for 1 hour, the function working time minute key will
step forward for 0 minutes, and the appointment time minute key will step forward for 30
minutes. When the maximum set parameter value is reached, it will jump to the minimum
parameter value to continue the cycle, and the time of long pressing the "time" key will increase
rapidly at the speed of 0.2 seconds per time.
8
、保温：
8. Insulation:
其它功能工作时间完成后，自动跳到保温功能，进入保温模式，默认保温温度为
73
℃
±2
℃，
工作
24
小时回到待机状态。
After the working time of other functions is completed, it will automatically jump to the heat
preservation function and enter the heat preservation mode. The default holding temperature is
73
℃
± 2
℃
, and it will return to the standby state after 24 hours of operation.
To Next Page
Loading...