BEARWARE 302547 - Display; Time Display; Date and Day Display

71English
If the aempt to receive a signal fails, the weather staon stops scanning aer
about 7 minutes. The DCF symbol disappears from the display.
Re-acvate the scanning by pressing the "DOWN" buon for about 3 seconds unl
the DCF symbol is shown again in the display. Alternavely, you have the opon of
manually seng the me. More informaon in this regard is given in the "Basic
Sengs" secon.
7. Display
Time display:
The me can be displayed in a 12-hour
or 24-hour format.When the daylight
saving me is enabled, the display
shows the "DST symbol". This funcon
is available only if the weather staon
receives a DCF signal.
Date and day:
The weather staon comes with
a date and day display. The date
is displayed in the le secon
and the day in the right secon.
The pre-congured language is
German. If you want to change the language, please refer to the secon "Basic
sengs" for more informaon.